If you want to install a magnetic track light, the first thing you need to do is the chandelier in the whole house. If the house is too short, it will be very embarrassing. If you make a built-in magnetic track, the black soft decoration after turning off the light will appear again. Extraordinary!
1. The top of the track is made of wood or iron keel, which can be nailed directly. When drilling, the rails can be installed directly and the screws can be fastened.
2. Remove the power protection cover on the top of the fixed rail and connect the power cord with a tool. Pay attention to the safe use of tools.
3. Flatten the clamp head of the track spotlight base, align it with the groove in the track, and insert the track spotlight base into the slideway with a little force. After tightening the seam, tighten the handle on which the chuck rotates. Must be screwed. After fixing the position, slide left and right to see if it is fixed.
4. After installation, turn on the spotlight and adjust the horizontal and vertical angles of the track spotlight according to the position of the projection target to ensure that the track spotlight can fully and effectively project the illuminated object.
Follow Us
